Herber Aircraft

LORD® Plateform Mounts

Aerospace Plateform Mounts (LORD 100, 150 Series)

Standard stock plateform mounts are widely used to efficiently isolate steady-state vibration and control occasional shock.

These versatile mounts are available in load ratings of 0.25 to 12 pounds per mount. When loaded to their rated capacity, a system natural frequency of approximately 18 Hz results, providing effective isolation in applications where disturbing frequencies are 40 Hz and above. Radial stiffness is approximately two to three times the axial stiffness.

Plateform Mounts (Industrial)

LORD plateform mounts provide effective isolation against industrial vibration. The contour of the flexing element was developed to provide uniform stress distribution. This, plus high-strength bonding and the use of specially compounded elastomers, provides maximum service life.

These versatile mounts are available in three types, each type featuring square, diamond or holder configurations to suit a variety of design requirements. The three types, plateform mounts, heavy-duty plateform mounts and multiplane mounts, offer a range in load ratings from .5 to 600 pounds with uniform stress distribution.

Snubbing washers provide an interlocking system of metal parts which act to prevent damage from overload or excessive shock impact.

LORD plateform mounts are easy to install and provide space efficiency. Typical applications include electronic equipment, business machines, medical equipment, small pumps, engines, and gen sets.

Copyright © 2021 - Herber Aircraft Service, Inc. All rights reserved.